High Capacity
This NEW PHD 22/2000 Hpsi Syringe Pump provides the highest capacity output of all of Harvard Apparatus’ microprocessor syringe pumps. This pump can hold up to four syringes from 20 to 200 ml. By combining the output from four 200 ml syringes, this pump is able to infuse up to 800 ml of fluid without refilling.
Ultra High Pressure
This NEW PHD 22/2000 Hpsi Syringe Pump over 400 pounds of force against the syringe plungers, higher than any other pump we manufacture. For applications with viscous fluids or requiring high pressure, this is the pump to handle the job.
Versatility
This Programmable PHD 22/2000 Hpsi syringe pump provides advanced capabilities directly from the keypad. No external computer is required. The pump can store up to four programs of 10 sequences each. Programs are stored in non-volatile memory. No other pump can provide this level of control and flexibility with the accuracy of the PHD 22/2000 syringe pump series. Like all of Harvard Apparatus’ other pumps, this new high capacity pump is easy to use.
Built-to-Last
This pump uses high quality, industrial grade components that will deliver years of smooth operation.
To Accommodate Almost Every Workbench
This pump is provided with a standard 5 foot cable that connects the control box to the pumping mechanism box. If additional distance is required between the controller and pump, a 30 foot remote extension cable is offered as an accessory.
Stainless Steel Syringes
Only Harvard Apparatus’ stainless steel syringes can be used with this pump. They can withstand high pressure applications and provide years of service, see page A70.
|
技术参数
|
|
类型
|
微处理器驱动型注射泵
|
|
稳定精度
|
± 0.5%
|
|
复现精度
|
± 0.1%
|
|
注射器 (最小/最大)
|
可以使用20到200 ml的不锈钢注射器
|
|
流速：
|
|
|
最小
|
1.5 μl / hr
|
|
最大
|
112 ml / min
|
|
非易失性存储器
|
存储所有设置
|
|
RS – 232
|
RJ11 - 4插头
|
|
TTL
|
9 - 针D - Sub. 插头
|
|
平均直线推力
|
433 lbs
|
|
驱动电机
|
1.8 ˚ 步进电机，变速比1:10
|
|
电机驱动控制
|
从1/2到1/32 微步步进可以进行微处理器控制
|
|
导向螺杆每转一圈电机前机步数
|
从8000到128000
|
|
步速：
|
|
|
最小
|
27.3秒/步
|
|
最大
|
416.7微秒/步
|
|
推进器移动速度：
|
|
|
最小
|
0.09 μm / min
|
|
最大
|
71.210 mm / min
|
|
功率
|
65 W, 0.5A保险丝
|
|
电压范围
|
95到130V交流, 60Hz, 220到260V交流, 50Hz, 可选
|
|
电缆长度
|
约152 cm (60 in)
|
|
尺寸, 高 x 宽 x 长
|
|
|
控制盒
|
9.5 x 27.9 x 22.9 cm (3.75 x 11 x 9 in)
|
|
注射器托架
|
22.9 x 43.2 x 30.5 cm (9 x 17 x 12 in)
|