产品详情
查看大图

  • 名称：加热板

  • 型号：Warm Plate
  • 厂商：其它品牌
  • 文档：
你添加了1件商品 查看购物车
简单介绍：
加热板操作简单，一键完成温度控制。非常适合在实验过程中暖热样品，期间历时几分钟到几小时，不需湿度和二氧化碳控制。代替显微镜载物台插件，从底部加热样品。适合体外授精实验。.
详情介绍：

Electric CO2 Microscope Stage Incubator - Technical specifications
Temperature range3°C above room temperature to 50°C
Temperature control accuracy±0.4°C
Heating TechnologyElectric
Type of controllerHardware
Temperature feedbackPlate temperature feedback
Regime temperature Timeabout 15 min.
Weightc.a. 60 g
Control Unit Dimensions (LxWxH, mm)Depending on the WP model

Temperature Regulation

The temperature is regulated by a controller acting on the power dissipated by the electric resistances.
The thermocouple reads the temperature of the heated plate. A careful calibration performed in our laboratories guarantees that specimen temperature is maintained at the desired value.

Safe

The Warm Plate is powered at 24V DC. This improves the thermal stability, avoids electro-magnetic interference with microscope electronic or other devices and ensures the safety. In addition, an alarm warns if the temperature limit is reached.

Efficient

The read temperature and the set temperature are at the same time displayed. It is possible to change the set temperature and the offset.

Software

Read Temperature Software is available to get temperature readouts and store them in the computer memory.

Technical Data

Temperature Profiles


Temperature Profiles: Focus on 37°C
Thermal Stability within 0.3°C

Back to top


Warm Plate Models


The Warm Plate is availbe in two different materials: metal and transparent glass.
The transparent glass warm plate is suitable when a large observation area is required
They are both suitable for upright and inverted microscopes and can accommodate any kind cell culture support (35 mm Petri dishes, 60 mm Petri dishes, OKO-lab Special Petri Dishes, Multiwell plates, Chamber Slides and Flasks).
 
Dedicated adapters allow to fit them in any circular and rectangular XY stage insert.
Dedicated models for the Carl Zeiss PrimoStar microscope and for the Prior NanoScan Z Stage PZ100 are available

List of available Warm Plates:
Models
Round Metal Warm Plate
Round Glass Warm Plate
Warm Plate for Carl Zeiss Primo Star
Warm Plate for Prior Piezo Stage

Warm Plate Models

Round Metal Warm Plate:
Shaped as a flat disc. Observation area: 20 mm of diameter. Dimensions: 80.0 mm diameter, 3 mm thickness. Weight: c.a. 50 g. It can be equipped with dedicated adapters to fit into rectangular XY stage inserts or into circular XY stage inserts having diameters wider than 80mm.

Back to top

The rectangular adapter allows to fit the Round Warm Plate in any 160x110mm sized stage (i.e. Ludl BioPrecison and BioPoint, Marzhauser SCAN IM 120x100, Prior H107 and H117), A.S.I. stages and all mechanical flat stages. A dedicated stage insert to fit it into the Nikon TI-S-E motorised XY stage is also available. Circular adapters allows to fit the Round Warm Plate into circular XY stage inserts having diameters greater than 80mm.

Round Glass Warm Plate:
It is an optical clear glass plate uniformly heated with transparent elements. Observation area: 80 mm of diameter. Glass thickness: 2mm. Weight: c.a. 60g. Rectangular shaped models available upon request. It can be equipped with dedicated adapters to fit into circular XY stage inserts having diameters bigger than 80mm.

Back to top

image not available

Warm Plate for Carl Zeiss Primo Star:
This model is dedicated to fit on the Carl Zeiss PrimoStar upright microscope. Rectangular observation area: 45x14 mm. Weight: c.a. 50 g. Plate dimension: 100x103x2 mm.

Back to top

Warm Plate for Prior Piezo Stage:
Dedicated to fit into Prior NanoScan Z Stage PZ100. It can accept one 35mm Petri-dish. Upgradable to CO2 Piezo Incubator. Observation area: 40 mm diameter.Weight: c.a. 50 g. Plate dimension: 64.4x92.4x2.5 mm.

Back to top


标题：
内容：
联系人：
联系电话：
Email：
公司名称：
联系地址：
 
 
注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!